S-tag from pancreatic ribonuclease A (RNase A). Due to abundance of charged and polar residues, this tag may improve solubility of recombinant proteins. It can be fused at the N- or C-terminus of a target protein.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at -20 °C, Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
The anti-Myc tag is a primary antibody which is used to detect proteins containing the Myc epitope tag. The Myc tag contains the amino acid sequence EQKLISEEDL, corresponding to amino acids 410-419 of human Myc.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at -20 °C, Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
CBP tag comes from muscle myosin light-chain kinase and contains 26 amino acid residues with the molecular weight of 4 kDa. This tag is characterized by the relatively high affinity for calmodulin (CaM), which makes it possible to purify CBP-tagged proteins from crude cell extracts using of a resin with CaM affinity. This antibody allows detection of CBP-tagged proteins.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at -20 °C, Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
TAP (tandem-affinity-purification) epitope tag makes a rapid purification of low abundance complexes. TAP approach can be combined with mass spectrometry to allow identification of protein interactions with a given target protein.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at -20 °C, Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Mouse
Species Reactivity:
TAP epitope tag
Immunogen:
TAP epitope tag, sequence: CSSGALDYDIPTTASENLYFQ, derived from the C-terminus of the TAP-tag construct after TEV cleavage,
Mouse immunoglobulin molecules of IgG1 isotype this ready to use Negative Control reagent contains purified non-conjugated mouse immunoglobulin molecules of IgG1 isotype, which have been selected on the basis of their binding characteristics: no specific binding to human cell surface or intracellular antigens
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Stored at 2-8 C, do not freeze.
Host Animal:
Mouse
Species Reactivity:
Calf intestine alkaline phosphatase (no cross reaction with human proteins)
Applications:
Direct Immunofluorescence (IF), Flow Cytometry (Flow cyt), Immunofluoresence (IF)
The clone VI-AP reacts with calf intestine alkaline phosphatase and does not show cross-reactivity with human proteins. The sensitivity of VI-AP mAb is determined by staining well-defined blood samples from representative donors with serial-fold mAb dilutions to obtain a titration curve that allows relating the mAb concentration to the percentage of stained cells and geometric MFI (mean fluorescence intensity). For this purpose, a mAb-concentration range is selected to include both the saturation point and the detection threshold In practice, 50 l of leukocytes containing 10^7 cells/ml are stained with 20 l mAb of various dilutions to obtain a titration curve and to identify the saturation point and detection threshold. The final concentration of the product is then adjusted to be at least 3-fold above the detection threshold.
Store at -20 °C.Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Goat anti-human IgG Fcγ is a secondary antibody conjugated to HRP which binds to human IgG Fcγ (gamma chain) in immunological assays.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Liquid
Storage Temp:
Store at -20 °C or -80°C. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Mouse IgG1 is a negative control for Immunofluorescence staining with FITC, Biotin, PE and APC mouse monoclonal antibodies of the IgG1 subclass. Monitoring the level of non-specific binding of mouse monoclonal antibodies to human cell surgace antigens can be done using this product.
IgG1 immunoglobulin Protein A/G purified in PBS. Contains 0.08% sodium azide.
Special application note:
PBMC: Add 10 l of MAB/10^6 PBMC in100 µl PBS. Mix gently and incubate for 15 minutes at 2 to 8 C. Wash twice with PBS and analyze. Whole blood: Add10 μl of MAB/100 μl of Whole Blood. Mix gently and 1/3incubate for 15 minutes at room temperature 20oC. Lyse the whole blood. Wash once with PBS and analyze. See instrument manufacturer’s instructions for Lysed Whole Blood and Immunofluorescence analysis with a flow cytometer or microscope. Allophycocyanin: (APC) conjugates are analyzed in multi-color flow cytometry with instruments equipped with a second laser and proper filters. Laser excitation is at 633 nm with a Helium Neon (HeNe) laser or a 600-640 nm (633nm) range for a Dye laser. Peak fluorescence emission is at 660 nm. RPE-Cy-5 +: Excites at 488nm and emits at 670nm. Store protected from light. Optimal concentration should be evaluated by serial dilutions.
The optimal working dilution should be determined by the investigator
Purity:
Ig fraction obtained by a proprietary 2-step procedure, in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2.
Special application note:
Antibody purity is > 80% based on SDS-PAGE.Antibody is supplied in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2. 0.05% (w/v) Sodium Azide is added as a preservative.Based on IEP, this antibody reacts with: • heavy (γ) chains on cat IgG • light chains on all cat immunoglobulins .Based on IEP, no reactivity is observed to: • non-immunoglobulin cat serum immunoglobulins .
This blocking peptide can be used as a control to neutralize AGO1 | argonaute 1 before immunolocalization or western blot. Furter details are provided below.AGO1 belongs to a group of argonaute proteins which are catalytic component of the RNA-incudes silencing complex (RISC). This protein complex is responsible for the gene silencing (RNAi).
Product Type:
Antibody
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Due to its low molecular weight, this peptide is not suitable for separation on a SDS gel,
Reconstitution:
For reconstitution please add sterile water
Molecular Weight:
1716,9 Da
Special application note:
Estimation of the ratio between antibodies and peptide : In neutralisation assay use 9,16 g of argonaute 1 peptide for 10 ml of reaction volume. In case of any questions please contact support@agrisera.com
Goat anti-Rabbit IgG (H&L), DyLight 680 conjugated is a secondary antibody conjugated to DyLight 680, which binds to rabbit IgG in immunological assays. DyLight 680 has Amax = 682 nm, Emax = 715 nm. DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
For reconstitution add 1,1 ml of sterile water,Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Antibody purity is > 95% based on SDS-PAGE.Affinity purified using solid phase Rabbit IgG .Antibody is supplied in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05% (w/v) Sodium Azide is added as a preservative.Based on IEP, this antibody reacts with: • heavy (γ) chains on rabbit IgG • light chains on all rabbit immunoglobulins .Based on IEP, no reactivity is observed to: • non-immunoglobulin rabbit serum proteins .
The optimal working dilution should be determined by the investigator
Purity:
Proprietary 2-step fractionation procedure, IN 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2 with 0.05 % sodium azide.
Special application note:
Antibody purity is > 80% based on SDS-PAGE.Antibody is supplied in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2. 0.05% (w/v) Sodium Azide is added as a preservative.Based on IEP, this antibody reacts with: • heavy (γ) chains on dog IgG • light chains on all dog immunoglobulins .Based on IEP, no reactivity is observed to: • non-immunoglobulin dog serum immunoglobulins .
Alpha Fetoprotein (AFP) is a protein that is encoded by the gene AFP in humans. It is a plasma protein that is produced during fetal development by the yolk sac and the liver. AFP binds to copper, nickel, fatty acids and bilirubin and exists in monomeric, dimeric and trimeric forms. In the human fetus, AFP is the most abundant plasma protein, it binds estradiol to prevent the transport of this hormone across the placenta to the fetus. The major function of AFP is to prevent the virilization of female fetuses.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Liquid, colorless, 0.2 m filtered
Storage Temp:
Store at 2-8°C. Shelf life of this product is 1 year from date of receipt. Prepare working dilution prior to use and then discard.
The optimal working dilution should be determined by the investigator
Purity:
Proprietary 2-step fractionation procedure.
Special application note:
Antibody concentration is >10 mg/ml (E 1% at 280 nm = 1.3).Antibody is supplied in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2 and 0.5 % sodium azide is added as preservative. Antibody purity is >75% based on HPLC.
Normal syrian hamster serum lipid extracted and dialyzed against 10 mM sodium phosphate, 0.15 M sodium chloride, pH 7.2. This product is used as a blocking reagent or control for most immunoassay applications.
Product Type:
Antibody
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. For long term storage after reconstitution, prepare small aliquots and store at -20 °C. For storage at 2-8 C, add a preservative to prevent growth of bacteria. Rehydrate with 10,0 ml of deionized water. Swirl gentle and let stand for up to 2 hours at 18-25 °C. Centrifuge reconstituted serum to remove any precipitates.
Protein concentration is 50,0 mg/ml (Bradford, IgG standards), Antibody is supplied in 10 mM sodium phosphate, 0,15 M sodium chloride, pH 7,2, No preservative is added
2 x 50 ml, two component ready to use solutions, enough for 50-60 midi blots (6,8 x 8,1 cm)
Special application note:
Highly stable for 18 month at 2 C to 8 C. Working stock is stable for 7 days at room temperature and 30 days at +4 C. Lot to lot consistency.High sensitivity, low background and superior signal to noice ratios.
Research area:
Rapid Western Blotting
Code:
Detect15
Agrisera
AS16 3111
2x100 ml (100 ml reagent A + 100 ml reagent B), enough for 10-20 midi blots (6,8 x 8,1 cm),
Goat anti-mouse IgG (H&L) - DyLight 550 Conjugated is a secondary antibody conjugated to DyLight 550, which binds to all mouse IgG (H&L) in immunological assays. DyLight 550 has Amax = 562 nm, Emax = 576 nm. Antibodies are are affinity purified using solid phase mouse IgG (H&L).DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on mouse IgG light chains on all mouse immunoglobulins.No reactivity is observed to: non-immunoglobulin mouse serum proteins.
Application Details:
1 : 20-1 : 2000 for most applications
Purity:
Immunogen affinity purified goat IgG.
Reconstitution:
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0,15 M Sodium Chloride, pH 7,2, 1 % (w/v) BSA, Protease/IgG free, 0,05 % (w/v) sodium azide is added as preservative
Goat anti-Rat IgG (H&L), DyLight 350 Conjugated is a secondary antibody conjugated to DyLight 350, which binds to Rat IgG (H&L) in immunological assays.DyLight 350 has Amax = 353 nm, Emax = 432 nm. Antibodies are purified using solid phase Rat IgG (H&L)DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) sodium azide is added as preservative.Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on rat IgG, light chains on all rat immunoglobulinsNo reactivity is observed to: non-immunoglobulin rat serum proteins
Goat anti-rabbit IgG (H&L) - DyLight 550 Conjugate, min. cross-reactivity to bovine, human, mouse IgG or serum proteins is a secondary antibody conjugated to DyLight 550, which binds to all rabbit IgG (H&L) in immunological assays. DyLight 550 has Amax = 562 nm, Emax = 576 nm. Antibodies are are affinity purified using solid phase rabbit IgG (H&L).DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on rabbit IgG light chains on all rabbit immunoglobulins.No reactivity is observed to: non-immunoglobulin rabbit serum proteins IgG from human or mouse serum proteins from bovine, human or mouse.
Application Details:
1 : 20-1 : 2000 for most applications
Purity:
Immunogen affinity purified goat IgG.
Reconstitution:
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0,15 M Sodium Chloride, pH 7,2, 1 % (w/v) BSA, Protease/IgG free, 0,05 % (w/v) sodium azide is added as preservative
Goat anti-rabbit IgG (H&L), DyLight 350 Conjugated, min. cross-reactivity to human serum proteins is a secondary antibody conjugated to DyLight 350, which binds to Rabbit IgG (H&L) in immunological assays.DyLight 350 has Amax = 353 nm, Emax = 432 nm. Antibodies are purified using solid phase Rabbit IgG (H&L)DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) sodium azide is added as preservative.Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on rabbit IgG, light chains on all rabbit immunoglobulinsNo reactivity is observed to: non-immunoglobulin rabbit serum proteins, human serum proteins
Goat anti-mouse IgG (H&L) , DyLight 594 Conjugate is a secondary antibody conjugated to DyLight 594, which binds to al mouse IgG (H&L) in immunological assays. DyLight 550 has Amax = 593 nm, Emax = 618 nm. Antibodies are are affinity purified using solid phase mouse IgG.DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on mouse IgG light chains on all mouse immunoglobulins.No reactivity is observed to: non-immunoglobulin mouse serum proteins.
Application Details:
1 : 20-1 : 2000 for most applications
Purity:
Immunogen affinity purified goat IgG.
Reconstitution:
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0,15 M Sodium Chloride, pH 7,2, 1 % (w/v) BSA, Protease/IgG free, 0,05 % (w/v) sodium azide is added as preservative
Goat anti-Rat IgG (H&L) - DyLight 633 Conjugated is a secondary antibody conjugated to DyLight 633, which binds to rat IgG (H&L) in immunological assays. DyLight 633 has Amax = 638 nm, Emax = 658 nm. Antibodies are are affinity purified using solid phase rat IgG (H&L).DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) sodium azide is added as preservative.Based on immunoelectrophoresis, this antibody reacts with: (γ) chains on rat IgG light chains on all rat immunoglobulins.No reactivity is observed to:non-immunoglobulin rat serum proteins.
Goat anti-human IgG (H&L) , DyLight 594 Conjugate is a secondary antibody conjugated to DyLight 594, which binds to all human IgG (H&L) in immunological assays. DyLight 550 has Amax = 593 nm, Emax = 618 nm. Antibodies are are affinity purified using solid phase human IgG (H&L).DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
Based on immunoelectrophoresis, this antibody reacts with: heavy (γ) chains on human IgG (γchain) light chains on all human immunoglobulins.No reactivity is observed to: non-immunoglobulin human serum proteins.
Application Details:
1 : 20-1 : 2000 for most applications
Purity:
Immunogen affinity purified goat IgG.
Reconstitution:
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0,15 M Sodium Chloride, pH 7,2, 1 % (w/v) BSA, Protease/IgG free, 0,05 % (w/v) sodium azide is added as preservative
Goat anti-rabbit IgG (H&L) - DyLight 633 Conjugated, min. cross-reactivity to bovine, human, mouse IgG or serum proteins is a secondary antibody conjugated to DyLight 633, which binds to rabbit IgG (H&L) in immunological assays. DyLight 633 has Amax = 638 nm, Emax = 658 nm. Antibodies are are affinity purified using solid phase rabbit IgG (H&L).DyLight is a registered trade mark of Thermofisher Inc., and its subsidaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) sodium azide is added as preservative.Based on immunoelectrophoresis, this antibody reacts with: (γ) chains on rabbit IgG light chains on all rabbit immunoglobulins.No reactivity is observed to:non-immunoglobulin rabbit serum proteinsIgG from human or mouseserum proteins from bovine, human or mouse.
Research area:
DyLight 633
Cookies:
X
We use cookies to help personalise and improve your web experience.
By using our website you consent to our use of cookies, some of which may have already been set on your device.
View our Cookie Policy to learn more.