The 5-HT 1A Receptor Antibody was raised against synthetic peptide sequence corresponding to amino acids 294-312 of the rat 5-HT1A receptor. The antiserum is provided as 100 µL of affinity purified serum containing 1% BSA. The antiserum demonstrates strongly positive labeling of rat cortex, arcuate and hippocampus using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/100 - 1/200 in PBS - Bn/Av-HRP detection. Intensification methods such as nickel will approximately double the dilution factor as recommended. The antibody was characterized by immunohistochemistry and Western blot. Western blot showed a single band of approximately 45 kD. Preincubation of the antibody with an excess of the synthetic peptide blocked staining. Immunohistochemical staining of rat brain correlates well with Northern analysis, in situ hybridization and receptor autoradiography. BlastP database sequence homology searches confirmed that this sequence is unique to rat, mouse and human 5-HT1A receptors.
The GAT-2 antiserum was quality control tested using standard immunohistochemical methods. The antiserum demonstrates strongly positive labeling of rat retina and leptomeninges using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/100-1/200 in PBS/0.3% Triton X-100Â - Cy3 Technique and 1/500 - 1/1,000 in PBS/0.3% Triton X-100 - biotin/avidin-HRP Technique. The antiserum has been characterized as specific to GAT-2; please see references listed below. GAT-2 immunolabeling is completely abolished by soluble pre-adsorption with synthetic rat GAT-2 (594-602) at a concentration of 10-5 M.
The peptide control for nNOS (N-terminal) is intended for the immuno-adsorption of nNOS (N-terminal) antiserum, catalog number 24431. Pre-adsorption of nNOS (N-terminal) antiserum, diluted according to the antibody specification sheet, with 5ug/ml nNOS (N-terminal) peptide immunogen following the instructions below provides complete blockage of nNOS (N-terminal) immunolabeling. The peptide is provided as 25ug of lyophilized human nNOS (N-terminal), and approximately 0.09% sodium azide, sequence 134-148. Please read the instructions carefully.
The 5-HT Antibody was raised in rabbit against 5-HTP coupled to BSA with paraformaldehyde. The antibody has a proven maximum biotin-streptavidin/HRP staining at a 1/1000 - 1/2000 dilution in rat raphe nuclei. Optimal dilution will vary depending upon fixation, labeling technique and/or detection system; therefore, a dilution series is recommended. The specificity of the antiserum was evaluated using a model system of gelatin-indole plugs by a method similar to published procedures (Shipper and Tilders, 1983). Results showed that the 5-HTP antibody dose dependently stained 5-HTP but did not stain any concentration of 5-HT or 5-HIAA. The antiserum was also tested by pre-adsorption with indole/paraformaldehyde/BSA conjugates. Staining was completely blocked by pre-adsorption with 5-HTP conjugate and unaffected by 5-HIAA or 5-HT conjugate.
The Calretinin Antibody was raised to chick calretinin fusion protein. The antibody has a proven maximum biotin-avidin/HRP staining at a 1/2000 - 1/4000 dilution in rat cortex, hippocampus and hypothalamus.
GluR1 (Ionotropic Glutamate Receptor) Peptide Control
Background Info:
The peptide control for GluR1 is intended for the immuno-adsorption of GluR1 antiserum, catalog #24439. Pre-adsorption of GluR1 antiserum, diluted 1/4000-1/8000 according to the antibody specification sheet, with 5ug/mL GluR1 peptide immunogen following the instructions below provides complete blockage of GluR1 immunolabeling. The peptide is provided as 25ug of lyophilized rat GluR1, and approximately 0.09% sodium azide, sequence 894-907. Please read the instructions carefully.
Raised against a C-terminal synthetic peptide sequence corresponding to amino acids 894-907 of rat GluR1 coupled to bovine thyroglobulin with gluraraldehyde.
Product Type:
Antibody - Antibodies
Antibody Type:
polyclonal
Format:
Lyophilised
Host Animal:
Rabbit
Immunogen:
Rat GluR1 (894-907)
Applications:
Immunohistochemistry, Immunocytochemistry, Western Blot
The GluR1 (lonotropic Glutamate Receptor1) Antibody was raised against a C-terminal synthetic peptide sequence corresponding to amino acids 894-907 of rat GluR1 coupled to bovine thyroglobulin with gluraraldehyde. The antibody produces strong labeling of GluR1 at dilutions of 1/4,000 - 1/6,000 using biotin-streptavidin peroxidase technique in rat cortex and hippocampus. Western blot analysis of GluR1 transfected cells and rat brain homogenates the antibody specifically labels a single band at Uapproximately 102 kD. Western blot analysis of GluR2, 3, 4, 4C, 5, 6, and 7 transfected cells revealed no immunolabeling. Immunolabeling of the above non-NMDA transfected cells demonstrates specificity for GluR1. Additionally, immunolabeling for GluR1 is completely abolished by pre-adsorption with synthetic rat GluR1 (894-907) at 5 µg per mL of diluted antibody.
The ImmunoStar N-terminal neuronal nitric oxide synthase antiserum was quality control tested using standard immunohistochemical methods. The antiserum demonstrates strongly positive labeling of rat hypothalamus, striatum, cortex and spinal cord using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/1,000 - 1/2,000 in PBS/0.3% Triton X-100 - biotin/avidin-HRP. By Western blot analysis of brain homogenates the antibody specifically labels a band of approximately 155 kD. Immunolabeling is completely abolished by pre-adsorption with synthetic human nNOS (134-148) at 5 µg per mL of diluted antibody. No cross reactivity with other forms of NOS was observed.
The 5-HT7 Receptor Antibody was raised against synthetic peptide sequence corresponding to amino acids 8-23 of the rat 5-HT7 receptor coupled to carrier protein with glutaraldehyde. The ImmunoStar 5-HT7 receptor antiserum was quality control tested using standard immunohistochemical methods. The antiserum demonstrates strongly positive labeling of rat cortex and hippocampus using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/100 - 1/300 in PBS - biotin/avidin-HRP Technique. Note: use of Triton X-100 or other detergents is not recommended. The antibody was characterized by immunohistochemistry. Immunohistochemical staining of rat brain correlates well with Northern blot analysis, in situ hybridization and receptor autoradiography studies. Immunolabeling is completely abolished by preadsorption with synthetic rat 5-HT7 receptor (8-23). BlastP database sequence homology searches indicate that the amino acid sequence is unique to rat 5-HT7A, 5-HT7B and 5-HT7C. There is also significant sequence overlap with the mouse and human forms.
Raised against synthetic peptide sequence corresponding to amino acids 17-34 of the rat 5-HT5A receptor coupled to carrier protein with glutaraldehyde.
Product Type:
Antibody - Antibodies
Antibody Type:
polyclonal
Format:
Liquid
Host Animal:
Rabbit
Species Reactivity:
Clam, Rat
Immunogen:
Rat 5-HT5A receptor (17-34)
Applications:
Immunohistochemistry, Immunocytochemistry, immunofluorescence, Western Blot
The 5-HT 5A Receptor Antibody was raised against synthetic peptide sequence corresponding to amino acids 17-34 of the rat 5-HT5A receptor coupled to carrier protein with glutaraldehyde. The ImmunoStar 5-HT5A Receptor was quality control tested using standard immunohisto-chemical methods. The antiserum demonstrates strongly positive labeling of rat cortex and hippocampus using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/100 - 1/300 in PBS/0.3% Triton X-100Â - Cy3 and 1/200Â - 1/400 in PBS/0.3% Triton X-100Â - Bn/Av-HRP. Intensification methods such as nickel will approximately double the dilution factor as recommended. The antibody was characterized by immunoblotting and immunohistochemistry. Immunoblots of rat brain extracts revealed the presence of two bands at molecular weights of 41 and 47 kD. The lower weight band agrees with the calculated molecular weight based on amino acid sequence. The higher weight may represent glycosylated receptor protein. Immunohistochemical staining of rat brain correlates well with Northern blot analysis and in situ hybridization studies. Immunolabeling is completely abolished by preadsorption with synthetic rat 5-HT5A receptor (17-34). BlastP database sequence homology searches indicate that the amino acid sequence is unique to rat and mouse 5-HT5A receptor.
The neuronal nitric oxide synthase C-terminal antiserum was quality control tested using standard immunohistochemical methods. The antiserum demonstrates strongly positive labeling of rat hypothalamus, striatum, cortex and spinal cord using indirect immunofluorescent and biotin/avidin-HRP techniques. Recommended primary dilutions are 1/1,000 - 1/1,500 in PBS/0.3% Triton X-100 - Cy3 Technique and 1/8,000 - 1/12,000 in PBS/0.3% Triton X-100 - Bn/Av-HRP Technique. By Western blot analysis of brain homogenates the antibody specifically labels a band of approximately 155 kD. Immuno-labeling is completely abolished by pre-adsorption with synthetic human nNOS (1419-1433) at 5 µg per mL of diluted antibody. No cross reactivity with other forms of NOS were observed. The nNOS antiserum has been used successfully in human, rat, mouse, guinea pig, cat, and monkey tissue. Detection of nNOS from other species will depend upon sequence homology.
The peptide control for Neurokinin 1 Receptor is intended for the immuno-adsorption of Neurokinin 1 Receptor antiserum, catalog number 20060. Pre-adsorption of Neurokinin 1 Receptor antiserum, diluted according to the antibody specification sheet, with 10 µg/mL NK1R peptide immunogen following the instructions below provides complete blockage of Neurokinin 1 Receptor immunolabeling.
The peptide control for Neurokinin 1 Receptor is intended for the immuno-adsorption of Neurokinin 1 Receptor antiserum, catalog number 20060. Pre-adsorption of Neurokinin 1 Receptor antiserum, diluted according to the antibody specification sheet, with 10 µg/mL NK1R peptide immunogen following the instructions below provides complete blockage of Neurokinin 1 Receptor immunolabeling. The peptide is provided as 100 µL of 50 mg of synthetic peptide corresponding to rat NK1R 393-407.
The peptide control for C-FOS is intended for the immuno-adsorption of C-FOS antiserum, catalog number 26209. Pre-adsorption of C-FOS antiserum, diluted according to the antibody specification sheet, with 5ug/ml C-FOS peptide immunogen following the instructions below provides complete blockage of C-FOS immunolabeling. The peptide is provided as 25ug of lyophilized human C-FOS, and approximately 0.09% sodium azide, sequence 4-17. Please read the instructions carefully.
The peptide control for nNOS (C-terminal) is intended for the immuno-adsorption of nNOS (C-terminal) antiserum, catalog number 24287. Pre-adsorption of nNOS (C-terminal) antiserum, diluted according to the antibody specification sheet, with 5 µg/ml nNOS peptide immunogen following the instructions below provides complete blockage of nNOS (C-terminal) immunolabeling. The peptide is provided as 25 µg of lyophilized human nNOS, sequence 1419-1433. Please read the instructions carefully before beginning the procedure.
Pre-adsorption of Mu Opioid Receptor antiserum, diluted according to the antibody specification sheet, with 10 µg/ml Mu Opioid Receptor peptide immunogen following the instructions below provides complete blockage of Mu Opioid Receptor immunolabeling.
The ImmunoStar peptide control for 5-HT2A Receptor is intended for the immuno-adsorption of 5-HT2A Receptor antiserum, catalog number 24288. Pre-adsorption of 5-HT2A Receptor antiserum, diluted according to the antibody specification sheet, with 5 µg/ml 5-HT2A Receptor peptide immunogen following the instructions below provides complete blockage of 5-HT2A Receptor immunolabeling. The peptide is provided as 25 µg of lyophilized rat 5-HT2A Receptor, sequence 22-41. Also, this antiserum contains 0.09% sodium azide. Please read the instructions carefully before beginning the procedure.
The Peptide Control: rat 5-HT2A Receptor, sequence 22-41.
Cookies:
X
We use cookies to help personalise and improve your web experience.
By using our website you consent to our use of cookies, some of which may have already been set on your device.
View our Cookie Policy to learn more.